Better C++ bindings for the OpenCL API
Repo eyalroz/opencl-api-cpp, read from GitHub 4 h ago. eyalroz has not joined Take My Repo.
eyalroz/opencl-api-cpp is a public repo on GitHub by eyalroz. Better C++ bindings for the OpenCL API. It declares the Apache-2.0 license on GitHub. It is written mainly in C++, has 2 stars and last changed on 2026-11-21. Nobody has reviewed it on Take My Repo yet, which says nothing about its quality. Read from GitHub on 2026-11-22.
In the maintainer's words. Shown from GitHub; Take My Repo does not keep a copy.
--==Warning: WIP - for testing and evaluation only! ==--
This is a header-only library of C++ bindings/wrappers for the C-language API of the OpenCL execution ecosystem.
It is an unofficial alternative to the Khronos Consortium's own CLHPP C++ bindings. It is intended to make working with OpenCL be less error-prone, more intuitive and consistent (both to write and read), and requiring less memorizing and less familiarity with idiosyncracies. This is achieved by using modern C++ language capabilities, programming idioms and recommended practices; see Motivation below for details.
Note: It is not the library's intention for users to write "higher-level" or more "abstract" code; these bindings are merely a modern-C++-arrangement of the OpenCL API itself.
This library is characterized by:
getInfo()mechanisms to get the attributes of your objects.impl/ subdirectory - with all those definitions and details.Why even bother writing new C++ bindings for OpenCL? After all, these already exist - and are official to boot: Khronos' CLHPP.
Well, I have used them on occasion. But - oh man! There are just too many damn problems with them, that I just give up and usually just fall back to using the C APIs. Let me point out some of what I've found to be so grating:
Painful error handling I: The wrappers may throw exceptions, but - the function interfaces are simply littered with cl_int* error parameters. Sometimes they don't even have an implicit default. Wanna launch a kernel? Not so fast. First spend a command defining a cl_int (why do I even have to know about this type?), and then hand over a reference to it.
Painful error handling II: CLHPP exception's what() string are typically just one or two words long. Usually it's just the C API call which failed. No contextual description, or "story", is provided, to help with your diagnostics.
Painful error handling III: If a CLHPP exception is thrown and treated like a general C++ exception, so what you get from it is the what() string - which typically gives you the API action which failed, but does not include the actuall error, i.e. the string interpretation of the error code - nor even the error code itself!
getInfo<>() instead of proper methods: One of the tedious aspects of the C API is the 'bureaucratic' mechanism for getting information about objects: clGetFooInfo(), which takes many arguments; and you have to run it twice - once for size, once for the data; and you have to memorize the exact enum value. Ugh. Now, CLHPP does make this somewhat easier, but it's still my_foo.getInfo<CL_FOO_CONTEXT>() - and of course that gives you the raw value, not something nicely wrapped. Why do I still have to bear this punishment?
One huge file: The source code of CLHPP is one file. It does not separate the declarations from the implementations; and the same file also contains a huge amount of namespace detail code which the user should be able to ignore. A single header file is more convenient to deploy - but that could be generated by amalgamting the separate header and offering the result as a release artifact.
Questionable default entities: Many of the entity wrapper classes in CLHPP include a mechanism defining default values. So, there's a default Context, default CommandQueue, default lots-of-stuff. That annoys me both usability-wise and class-design-wise: There aren't such defaults in OpenCL. Why make them up? Just because we're using C++? No. This warps the user's perception of the OpenCL API. Moreover - I don't like this mechanism being complected by force into the basic class for the OpenCL entity. Want to have defaults? Fine, put them somewhere else.
Can't trust your objects : With CLHPP, you can default-construct an OpenCL entity wrapper object. That's just wrong. Why should cl::Device() work? Am I running the device? Invoking the device? It must obviously have some kind of disengaged semantic... but - that means I have to be suspicious of every cl::Device instance I'm getting, anywhere in the code! A cl::Device might not be a real device, but rather a "null device", "disengaged value". And the same goes for essentially all classes. That undue burden is pretty much the same as having to make sure my cl_device_id is not null, whenever I receive one. I don't want to live in that world :-(
Why is everything invokable? In CLHPP, most classes have an operator(). What is that? Am I running my platforms? Invoking my contexts? Nope. Well, those just yield ther raw handle (cl_platform_id, cl_context_id etc.). That's not how I want it to be accessible.
Consecutive arguments easy to confuse One of the difficulties with the OpenCL C API is that many functions take numtiple parameters, some which are mutually convertible. Example: flags and size in clCreateBuffer(). I would expect C++ bindings to safeguard me from that: Either not having to specify both of them, or using not-implicitly-convertible types. But - CLHPP keeps that problem: Have a look at cl::Buffer::Buffer() - it takes exactly those two param
The vector obsession Have you noticed how so many of the CLHPP methods take, or return, std::vector's? std::vector, especially with the default allocator, is a notoriously unwieldy class: You can wrap storage in a vector, nor can you release the storage and use it for something else. So, if you have contiguous information somewhere, and you need to pass it to a CLHPP class - though luck, you're going to have to create a new vector for it. No templating nor even the use of span<T>'s.
Constructor glut A common 'temptation' in C++ class design is offering a large number of constructors. There are a few cases where this might be merited or unavoidable, but it is typically more confusing than useful. cl::Buffer has 22 separate combinations of parameter types usable to construct it! (8 constructor definitions, 7 of which have 2 default parameter values each)... and some of them involve enqueuing copy operations on some command queue.
Different dimensions classes for 2D and 3D, which means that you are either saddled with non-uniform handling of 1D, 2D and 3D cases, or alternatively, you have to rely on 'dummy' values in your 3D dimensions class to express 1D or 2D dims.
Having spent quite a while polishing my CUDA Modern-C++ API wrappers library, I was sure it could be done differently; and that if I put my nose to the grindstone, I could make it happen.
You may have noticed this list reads like the opposite of the key features, listed above: The idea is to make this library overcome and rectify these deficiencies as much as possible.
For CMake, you have several alternatives for obtaining the library to use in your project:
(apriori) If your development environment or OS distribution bundles the library and makes it available on CMAKE_PREFIX_PATH - then just skip this list.
(apriori) Download a release tarball from the Releases page. Then, configure it with CMake, build it, and install it - to a place visible to cmake when it searches for packages (see CMAKE_PREFIX_PATH).
(at config time) use CMake's FetchContent module to have CMake itself obtain the project source code and make it part of your own project's build, e.g.:
include(FetchContent)
FetchContent_Declare(opencl-api-cpp_library
GIT_REPOSITORY https://github.com/eyalroz/opencl-api-cpp.git
GIT_TAG v12.34.56 # Replace this with a real available version
OVERRIDE_FIND_PACKAGE
)
Now that you have the package, in your project's CMakeLists.txt, you write:
find_package(opencl-api-cpp CONFIG REQUIRED)
This will let you use the target: opencl-api-cpp::api as a dependency for your own targets. Example:
target_link_library(my_app opencl-api-cpp::api)
Use without CMake:
Since this is a header-only library, you can simply add the src/ subdirectory as one of your project's include directories. However, if you do this, it will be up to you to make sure and have the OpenCL headers include directory in your include path as well, and to link against the relevant OpenCL libraries.
This library is intended to cover the OpenCL API, sans graphics-related interoperability functions (for OpenGL, DirectX, Direct3D etc.).
This goal is close to being achieved, but we're not all the way there. You can find remaining omissions as issues tagged with "core-api-coverage". Perhaps the most prominent omission at this time is execution graphs, i.e. 'queues' which may execute out-of-order, subject to defined dependencies.
Efforts will be made to support Khronos-defined extensions, but - this is less of a priority. Such extensions can be found via issues tagged with "extension-coverage", further development work may take longer. The most prominent unsupported extension is probably Command Buffers.
Vendor-specific extensions may or may not be supported, arbitrarily, with no promises made that point.
Let's start with the very first lines of the example program in the CLHPP documentation's root page:
| Khronos CLHPP | opencl-api-cpp |
|---|---|
std::vector<cl::Platform> platforms;
cl::Platform::get(&platforms);
// ..snip...
for (auto &p : platforms) {
|
for (auto &p : opencl::platforms()) {
|
std::vectorplatforms() uses.Let's continue: The program must now try and obtain a platform supporting OpenCL 2.0 or later.
| Khronos CLHPP | opencl-api-cpp |
|---|---|
cl::Platform plat;
for (auto &p : platforms) {
std::string platver = p.getInfo<CL_PLATFORM_VERSION>();
if (platver.find("OpenCL 2.") != std::string::npos ||
platver.find("OpenCL 3.") != std::string::npos) {
plat = p;
}
}
if (plat() == 0) {
std::cout << "No OpenCL 2.0 or newer platform found.\n";
return -1;
}
|
auto platform = [] {
auto is_acceptable = [](auto const & p) { return p.version().major >= 2; };
auto platforms = opencl::platforms();
auto iter = std::ranges::find_if(platforms, is_acceptable);
(iter < platforms.end()) or die("No OpenCL 2.0 or newer platform found.");
return *iter;
}();
|
The die() function is just a simple hack (that's not part of this library):
[[noreturn]] int die(std::string_view message) {
std::cerr << message << '\n';
exit(EXIT_FAILURE);
}
you'll also notice that:
platform variable ever hold an invalid value.find_if() line would need the begin() and end() iterators; a little more verbose, but would work fine.for, if, or while. Remember Sean Parent's 2013 C++ Seasonings talk?Our last comparison of code segments regards building a program from a couple of kernel source code strings:
| Khronos CLHPP | opencl-api-cpp |
|---|---|
std::vector<std::string> programStrings; programStrings.push_back(kernel1); programStrings.push_back(kernel2); |
auto sources = { kernel1, kernel2 };
auto sources_ = opencl::program::source::create(context, sources);
auto options = opencl::program::compilation::options::create();
options.language_version = opencl::make_version("2.0");
auto build_result = opencl::program::build_(sources_, options);
if (not build_result.succeeded()) {
std::cerr << "Build failed.\n";
for (auto const& target_build_info : build_result.info()) {
auto target = target_build_info.device();
std::cerr << "Build log for device " << target.name() << ":\n\n";
std::cerr << target_build_info.log() << std::endl;
}
exit(EXIT_FAILURE);
}
|
Some points to note here:
build_result object can describe either a successful build with resulting artifacts, or a failure, in which case one can loog into the reason through the object.CL_OUT_OF_HOST_MEMORY or CL_COMPILER_NOT_AVAILABLE or other such errors.context.devices() when we don't specify targets explicitly; doing so, we could then obtain individual target build info with build_result.info_for(target_device);buildInfo variable we get in the CLHPP example is an std::pair. Using pairs rather than custom structures makes it difficult to figure out what each field is suposed to mean... with this library - you don't have to memorize this information.std::initializer_lists's).More details about these will be added under the examples directory.
eyalroz/opencl-api-cpp is a public repo on GitHub by eyalroz. Better C++ bindings for the OpenCL API.
It declares the Apache-2.0 license on GitHub.
Its maker has not tagged a system, so it is unknown here. Its README says what it needs.
Open "Take it" on its page: Take My Repo writes an install plan for your machine and hands it to your AI agent (Claude Code, Codex or Cursor), which asks you before each step. Take My Repo has not tested it on any machine.
Its last change on GitHub was on 2026-11-21. GitHub counts 22 open issues and pull requests. Take My Repo does not judge from that whether it is maintained.
Nobody has reviewed it on Take My Repo yet, which says nothing about its quality.
LWJGL is a Java library that enables cross-platform access to popular native APIs useful in the development of graphics (OpenGL, Vulkan, bgfx), audio (OpenAL, Opus), parallel computing (OpenCL, CUDA) and XR (OpenVR, LibOVR, OpenXR) applications.
Reverse engineer anything with agents, from app behavior down to native binaries.
Flutter makes it easy and fast to build beautiful apps for mobile and beyond
f.k.a. Awesome ChatGPT Prompts. Share, discover, and collect prompts from the community. Free and open source — self-host for your organization with complete privacy.
Thin, unified, C++-flavored wrappers for the CUDA APIs
A class for Technion IIT PhD/Masters theses - with a sample thesis using it
This page is also available as structured data, with the same sources and dates.
/api/v1/resources/gh/eyalroz/opencl-api-cppTake My Repo has not tested this on your machine. Requirements come from the project's own documentation.