StreamCore32
StreamCore32 serves as a connect-device for qobuz or spotify and as internetradio. Based on ESP32 andVS1053
- 24
- C
- 6 wk ago
StreamCore32 serves as a connect-device for qobuz or spotify and as internetradio. Based on ESP32 andVS1053
2017: VS1053 Micro Midi Synthesizer: This uses the VLSI VS1053b Audio and Midi DSP chip in its real-time Midi mode. In this mode it acts as a 64 voice polyphonic GM (General Midi) Midi synthesizer. An Arduino Uno standalone micro controls an OLED display, three buttons (Function Select and Up or Down, and passes the Midi data stream through to the audio DSP. The music board chosen was the Adafruit
2017: Audio Effects VS1053 Preamp: Music effects box using the VLSI VS1053 Audio DSP with 5 adjustable effects parameters. It has 9 fixed effects and 1 customizable effect, where each effect has five effects settings namely delay, decay-repeat, modulation speed and depth, and the mix-ratio of the processed and direct audio. It includes adjustments for bass and treble boost, bass and treble centre
2020: VS1053 Teensy36 Teensy41 Music Effects Player. Adjust volume and 5 effect parameters: delay, decay-repeat, modulation speed and depth, and wet-dry mix-ratio. Also bass and treble boost, bass and treble centre frequency, and a selection of six gain values.
An esp32 app to play web-radio or music files from a local lamp or llmp server. Needs a separate VS1053 decoder board. Compiles in the Arduino IDE.
A music player for Adafruit ESP32-S3 Reverse TFT Feather with a Adafruit Music Maker FeatherWing.
Another internet radio player project reusing parts and case of an old DNT IPdio Tune internet radio.
2017-2023: The VLSI VS1053 DSP is controlled by a Pi Pico (RP2040), a Teensy 3.x and 4.x, and an ATmega328, as a Music Effects Box, a GM Midi Synth, and an SDCard Music Player.
Yet another library for the VS1053b audio processor - optimized for Teensy microcontroller boards
OS Audio Player is an ESP32 + VS1053 based network and SD audio player with a responsive web interface. Plays MP3, M4A, AAC, OGG, 16-bit FLAC files and radio streams. This is a PlatformIO project.
Turn your Arduino UNO with Music Shield into a fully working standalone USB/Serial General MIDI synth!