counterfeit_DS18B20
How to tell original from fake DS18B20 temperature sensors.
- 691
- C++
- Apache-2.0
- 24 mo ago
How to tell original from fake DS18B20 temperature sensors.
Arduino library for interfacing with Maxim temperature sensors
A Python package and CLI tool to work with w1 temperature sensors like DS1822, DS18S20 & DS18B20 on the Raspberry Pi, Beagle Bone and other devices.
Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more
Lightweight onewire protocol library for embedded systems. It uses UART peripheral or GPIO toggling
ESP32-compatible example for Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer.
1-wire service library. OneWire compatible. Dallas thermometers support.
ESP32-compatible C library for Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer.
Data logger for multiple DS18B20 temperature sensors on one or more machines
5 channel aquarium LED controller with web interface for ESP32 boards. Supports DS18B20, SSD1306, ILI9341, XPT2046 and SmartConfig. Arduino IDE.
Golang get temperature from ds18b20 sensor connected to a Raspberry PI (GPIO w1 pin).
Command line configured kernel mode 1-wire bus master driver. w1-gpio standard Linux module enhancement/substitution.
IoT container for Raspberry Pi used to measure temperature and humidity
Raspberry Pi library for GPIO, 1-Wire, SPI, System Time Counter (STC) access. There have been provided APIs for handling various popular devices.
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО". Open source hardware project
This is a 5 channel LED aqua controller to program gradual sunrises and sunsets. Also has a moon phase simulator.
Uses: attic_fan_remote_sensor : ESP01 Master & esp01 remote, DS18B20, ESPNOW, 2n2222-SSR-25 DA: Control "relay" SSR-25 DA to turn on/off a box fan that covers an attic access in the ceiling. Using two DS18B20 temp sensors, one in the Attic and one in the hallway AND a third remote esp01 managing a DS18B20 the Attic esp01's C++ will determine whether to turn on / off the solid state module for the
Easy DS18B20 temperature sensor library: several sensors on one wire, non-blocking reads, clear errors. No OneWire or DallasTemperature needed.
A simple ESP8266 based webserver that shows the current temperature from a Dallas (Maxim) DS18B20 sensor.
Local thermostat for a central system (repository of thermostat with floor heating)