rtlsdr-433m-sensor
Decoder for Oregon Scientific v1 protocol wireless temperature sensors with RTL-SDR and GNU Radio.
- 185
- Python
- 10 y ago
Decoder for Oregon Scientific v1 protocol wireless temperature sensors with RTL-SDR and GNU Radio.
ESP32-compatible example for Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer.
ESP32-compatible C library for Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer.
5 channel aquarium LED controller with web interface for ESP32 boards. Supports DS18B20, SSD1306, ILI9341, XPT2046 and SmartConfig. Arduino IDE.
Golang get temperature from ds18b20 sensor connected to a Raspberry PI (GPIO w1 pin).
Raspberry Pi library for GPIO, 1-Wire, SPI, System Time Counter (STC) access. There have been provided APIs for handling various popular devices.
Platform-agnostic Rust driver for the TMP102 and TMP112 digital temperature sensors
Combined Sensors library. A SDK C++ library for Raspberry PI PICO's. Supported list : BMP390 BMP280 LM35 LM75A DHT11 AHTXX
A low power RF data link between two ATmega328's based Arduino units , Sensor data is transferred Via a 433 Mhz transmitter. and then displayed on an OLED CH1115.
Platform-agnostic Rust driver for MLX90614/MLX90615 Infrarred thermometer
Raspberry Pi Python library for DHT20 Temperature and Humidity Sensor with CRC verification.
Platform-agnostic Rust driver for the LM75 temperature sensor and thermal watchdog.
Measures temperature and humidity using a GXHT30 and displays this information on an SSD1306 OLED display. Offers a HTTP endpoint to read values as JSON, also outputs values on serial.
Arduino library for Deneyap Temperature&Humidity, Barometer Sensor SHT4X
Platform-agnostic Rust driver for the HDC2080, HDC2010 and HDC2021 low-power humidity and temperature digital sensor
A feature-complete Arduino library for the BMP390 high-precision pressure and temperature sensor. Supports FIFO buffering, watermark interrupts, I2C/SPI communication, and altitude estimation. Compatible with ESP32 and other Arduino platforms. Six examples included
Arduino library support for Sensorion SHT1x(SHT10, SHT11, SHT15) all command.
The Integrated Air Quality and Hazardous Gas Detection System uses Internet of Things (IoT) technology to monitor air quality, temperature, humidity, and hazardous gases like CO₂ and NO₂ in real-time.
Adruino driver for Texas Instruments HDC10XX humidity and temperature sensors with I2C bus.
The software for a MCU controlled heaterfan with RGB LED temperature indicator.
A Reinforcement Learning MVP (Minimum Viable Product) for Condition-Based Maintenance (CBM) using industrial equipment temperature sensor data. This project implements a sophisticated QR-DQN (Quantile Regression Deep Q-Network) agent to learn optimal maintenance policies balancing risk mitigation and cost minimization.
The Smart Farm project aims to revolutionize agricultural practices by implementing advanced technology to monitor and optimize crop growth and health.