sparkfun
Building open source widgets to make prototyping hardware easier since 2002.
Built from sparkfun's public GitHub profile, Boulder, CO. Not on Take My Repo yet, so there are no posts or updates here.
An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules
An Arduino library to control the BME280 humidity and pressure sensor.
Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code!
A library for the laser based VL53L1X Time Of Flight distance sensor capable of detecting a target 4m away!
An Arduino library for the easy control of external I2C EEPROMs.
Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
An Arduino Library for the BNO08x IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.
An Arduino library for the UM980 and other Unicore based triband GNSS RTK receivers.
An Arduino library to support Short Burst Data communication using the Iridium 9602 and 9603N over both Serial and I2C
Documentation and firmware for the SparkFun DataLogger IoT line of products.
An Arduino library for the u-blox SARA-R5 LTE-M / NB-IoT modules with secure cloud
Arduino Library to support the Bosch BMV080 Particulate Matter Air Quality Sensor PM2.5 via I2C and SPI.
Arduino Library for SparkFun's OLED Qwiic (I²C) boards
The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.
An Arduino Library for the Allegro MicroSystems ACS37800 power monitoring IC