SparkFun_RTK_Firmware
Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
- 109
- C++
- 5 wk ago
Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
Documentation and firmware for the SparkFun DataLogger IoT line of products.
Arduino Library to support the Bosch BMV080 Particulate Matter Air Quality Sensor PM2.5 via I2C and SPI.
Arduino Library for SparkFun's OLED Qwiic (I²C) boards
The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.
The SparkFun RTK mosaic-X5 is a GNSS station based on the Septentrio mosaic-X5 GNSS receiver. It features an aluminum enclosure, support for a WiFi network bridge, data logging, and multiple power options, including PoE.
The SparkFun RTK Postcard is a compact development board for your high-precision positioning and navigation needs.
he SparkFun Spectral UV Sensor - AS7331 (Qwiic) measures UV radiation on three channels
The SparkFun GNSS Disciplined Oscillator (GNSSDO / GNSSDO+) is a precision time and frequency reference based on the Septentrio mosaic-T GNSS receiver. It features a disciplined 10MHz TCXO / OCXO oscillator, aluminum enclosure, Ethernet, PTP broadcast, data logging, multiple power options, and supports the Fugro AtomiChron timing service.
A small breakout board for the quadband RTK capable LG290P GNSS receiver .
A breakout board for the Bosch Particulate Matter Sensor BMV080 PM2.5 supporting Qwiic and SPI.
The SparkFun Simultaneous RFID Reader - M7E offers a simple way to read and write UFH RFID tags (EPCglobal Gen 2).
Documentation, firmware, and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless UART pipe and are a great wireless replacement for serial cables.
A development board using the Thing Plus footprint featuring the ESP32-C5 Dual-Band module.
The SparkFun Thing Plus - RP2350 is a dynamic and powerful wireless development platform in the Thing Plus form factor built around Raspberry Pi's RP2350 microcontroller..
An Arduino Library for the ADS1219 24-Bit 4-Channel 1-kSPS ADC from TI - requires the SparkFun Toolkit
Breakout board for the mosaic-X5 triband GNSS receiver with RTK capabilities.
A pair of IoT RedBoards featuring the ESP32-P4. WiFi/BLE version includes an ESP32-C5 for wireless communication. PoE version includes Ethernet connector, transeiver and PoE regulator for power & network connections.
The SparkFun Thing Plus - RA6M5 is a development board featuring the high-performance RA6M5 microcontroller from Renesas, which is perfect for real-time applications.
Qwiic Breakout for the 14-channel Multi-Spectral Sensor AS7343 from AMS.
A Qwiic-enabled breakout for the Bosch BMI330 6-axis IMU (3-axis accelerometer + 3-axis gyroscope).
SparkFun Arduino Library for ADE7953 Non-Invasive Current Sensor
A breakout for the IM19 GNSS-tilt-compensating IMU from Feyman
A small board that adds a display, navigation, logging, and battery management.
An I²C-controlled Qwiic device that provides solderless plug-and-play buzzer sounds!
A USB breakout board for the mosaic-G5 P3 allband GNSS RTK receiver
Top level repo for a suite of buck regulator form factors using the AP3429A buck regulator.
A Qwiic breakout for the STCC4 C02 and SHT40 temperature and humidity sensor.
A USB evaluation board for the dual L1/L5 frequency DAN-F10N GNSS receiver.